Pure Sine Wave Inverter Input: 12 VDC Output: 120 VAC 300 Watts, ETL Approved

Pure Sine Wave Inverter Input: 24 VDC Output: 120 VAC 300 Watts, ETL Approved

Samlex 150W, 12V, 60 Hz, Pure Sine Wave Inverter. With USB charging port & AC outlet. ETL Listed & UL60601.

Front 5" Directional Caster with Locking Lever

Rear 5" Non-Directional Caster with Locking Lever

6' CAT6a 10-Gigabit Shielded Snagless RJ45 Ethernet Cable.

6 Pin DC Power Output Cable.

4 Pin DC Power Output Cable.

Y splitter cable for AC Power Modifled Without Ground.

24" Battery Cradle Power Wire.

6" Battery Cradle MOLEX Cable.

CART.PS.CHRG.LIFE - DTG MPower X300 Tri-Bay Charger - POGO Connector. Charges up to 3 DTG X250 & X300 Batteries within 2-hours.

Definitive Battery (Gray) MPower X300 LFP Swappable Battery.

CART.PS - DTG Problem Solver Cart, 18" Adjustable Height Work Surface, Incl. DTG UPS X300 Controller, Large Bottom Shelf, Small Printer Shelf, 5" Directional Locking Casters, Front Handles, Cup Holder. Batteries Not Included.

Samlex 120W, 12V, 60 Hz, Pure Sine Wave Inverter. With USB charging port & AC outlet. ETL Listed & UL60601.

1" Long Black-Oxide Steel Screws (#10) for Mounting Worksurface to DTG Carts. (Pack of 6)

1 1/2" (Size 10/24) Steel Button Head Cap Screws with Hexagon Socket for Printer Cover, Shelf Plates, and all Rear Panels. (Pack of 100)

92095A206 Lift Engine Screws (Pack of 100)

Screws for Laptop Security Bracket. (Pack of 100)

12mm Long 18-8 Stainless Steel Screws for Bottom Battery Cradle Housing. M3 Size. (Pack of 100)

1/2" Phillips Thread-Locking Flat Head Screws for Battery Cradle. 10-24 Thread. (Pack of 100)

1/4" Locktite 18-8 Stainless Steel Hex Drive Screw for Printer Stand, White Plate, Monitor Bridge, Shelf Bracket, or Cradle Bracket. 20 Thread Size. (Pack of 100)

92360A420 Screws (Pack of 25)

Screws for Work Surface Mount Bracket for DTG Carts.

Shelf Bracket Fastener Plate (Pins). Without Mounting Hardware.

Tripp Lite 1 Outlet Portable Surge Protector Power Strip.

Side Small Printer Shelf for DTG Carts.

Scanner Holder Bracket for DTG Carts. Without Mounting Hardware.

DTG X300 Hybrid Power System Bottom Rear Cover.

Work Surface Left Arm Bracket for DTG Carts. Without Mounting Hardware.

Battery Cradle Assembly with Steel Cradle and Plastic base. Connector Pins Not Included.

Lift Engine Knob for adjustable height DTG Carts. Without Mounting Hardware.

Mount for Laptop Security Bracket. Screws Not Included.

Left Lift Engine Support Bracket. Without Mounting Hardware.

Replacement Male POGO Connector for DTG X250 & X300 Batteries.

Bracket to Mount DTG Steel Battery Craddle to DTG Carts. Without Mounting Hardware.

Black Large Cup Holder DTG Cart Work Surface.

Work Surface Right Arm Bracket for DTG Carts. Without Mounting Hardware.

Battery Retrofit Kit Strap to Secure battery in place.

Right Lift Engine Support Bracket. Without Mounting Hardware.

DTG Tri-Bay Battery Charger Back Plate. Mounting Hardware Sold Separately

Controller Cradle Assembly - POGO Connector

DTG Steel Battery Cradle.

Poser Cord Hook for DTG Carts. Hardware Included.

LCD Monitor Bridge for DTG Carts.

Laptop Security Bracket. Hardware and Tool Included.

USB Hub includes 3' Extension Cable for DTG Carts.

Bottom Rear Column Cover for DTG Carts. Screws Not Included.

Alike-Keyed Standard-Keyed Cam Lock for DTG Cart Tech Tray Cover. Key Included.

CART.PS.PWRKIT.LIFE - DTG Problem Solver Battery Power Retrofit Kit.

Replacement Female POGO Connector for UPS Controller & Tri-Bay Charger

Right Bottom Shelf Support Bracket for DTG Carts.

1/4" Long Allow Steel Hex Drive Rounded Head Screws for White Bracket. 10-24 Thread. (Pack of 100)

4-Sided Lower Metal Shelf for DTG Carts. Without Mounting Hardware.

DTG MPower X300 UPS Controller. Includes RJ45 APB-11084 4 Pin Cable, Battery Power Meter (Fuel) Gauge, 2 Cradle MOLEX Cables, Mounting Bracket, and, Dual Female POGO Steel Cradles.

Printer Shelf for Small Zebra Clamshell Printer. Without Mounting Hardware.

Black Adjustable Lift Handle for DTG Carts.

Rev 2 Replacement Gas-Piston Adjustable Height Lift Mechanism for DTG Carts.

Left Bottom Shelf Support Bracket for DTG Carts. Without Mounting Hardware.

Locking Tech Tray Cover with Key for DTG Carts.

Top Column Panel for DTG Carts. Screws Not Included.

Replacement Adjustable Height Lift Mechanism with Shelf Brackets for DTG Carts. Hardware Not Included.

Nylon Acorn Nut for Adjustable Height Lift Engine Knob on DTG Carts.

Top Work Surface for DTG Carts. Without Mounting Hardware.

6' 18 AWG Univeral Power Cord (NEMA 5-15P TO IEC320C13) (TAA Compliant)

Sliding Mouse Tray with Brackets and Hardware for DTG Carts.

Side Label Holder Bracket for DTG Carts. Hardware Included.

Metal Mounting Plate that attaches to the bottom of the DTG Cart Work Surface.

Middle Rear Column Panel for DTG Carts. Screws Not Included.

Battery Power Meter (Fuel) Gauge. Ethernet Cable Not Included.

Basic Mounting Bracket for DTG Carts. Without Mounting Hardware.

UPS Controller Bracket. Mounting Hardware Not Included.